[About] [People] [Research] [Publications] [Education] [Events] [Outreach] [Links]

2005	2004	2003	2002	2001
2000	1999	1998	1997	1996
preprints
	= Reprint available (.pdf format)
2005
2005.01: C.-S. Kim, Y. Hu, G.S. Rohrer, V. Randle, "Five-Parameter Grain Boundary Distribution in Grain Boundary Engineered Brass," Scripta Materialia, 52 (2005) 633-637.
2005.02: A.J. Francis and P.A. Salvador, "Effect of Surface Treatment on Chiral and Achiral SrTiO3 Surface Morphology and Metal Film Growth," Ceramic Transactions, 158 (Surfaces, interfaces, and the science of ceramic joining) (2005) 37-46.
2005.03: : G.S. Rohrer and C.-S. Kim, "The Influence of Singular Surfaces and Morphological Changes on Coarsening," Zeitschrift fur Metallkunde, 96 (2005) 191-196.
2005.04: E.P. Gorzkowski, H.M Chan, M.P. Harmer, T. Sano, C.-S. Kim, G.S. Rohrer, "Changes in the Distribution of Interfaces in PMN- 35 mol% PT as a Function of Time," Zeitschrift fur Metallkunde, 96 (2005) 207-210.
2005.05: G.S. Rohrer, "Influence of Interface Anisotropy on Grain Growth and Coarsening," Annual Review of Materials Research 35 (2005) 99-126.
2005.06: T. Sano, C.-S. Kim, and G.S. Rohrer, "Shape Evolution of SrTiO3 Crystals During Coarsening in a Titania-Rich Liquid," J. Amer. Ceram. Soc., 88 (2005) 993-996.
2005.07: J. Gruber, D.C. George, A.P. Kuprat, G.S. Rohrer, A.D. Rollett, "Effect of Anisotropic Grain Boundary Properties on Grain Boundary Plane Distributions During Grain Growth," Scripta Materialia 53 (2005) 351-355.
2005.08: A.D. Rollett, "Abnormal Grain Growth and Texture Development," Materials Science Forum 495-497 (2005) 1171-1176.
2005.09: K. Barmak, W. Archibald, J. Kim, C.-S. Kim, C.-S., A.D. Rollett, G.S. Rohrer, S. Ta'asan, D. Kinderlehrer, "Grain boundary energy and grain growth in highly-textured Al films and foils: experiment and simulation," Materials Science Forum 495-497 (2005) 1255-1260.
2005.10: E.R. Homer, J.A. Basinger and B.L.Adams, "Variance of the grain boundary character distribution," Materials Science Forum 495-497 (2005) 871-876.
2005.11: Y. Pang and P. Wynblatt, "Correlation between Grain Boundary Segregation and Grain Boundary Plane Orientation in Nb-doped TiO2," J. Am. Cer. Soc., 88 (2005) 2286-2291.
2005.12: D. Chatain, P. Wynblatt, G.S. Rohrer, "Equilibrium crystal shape of Bi-saturated Cu crystals at 1223 K," Acta Materialia, (2005), 53 (2005) 4057-4064.
2004
2004.01: D. Chatain, P. Wynblatt, and G.S. Rohrer, "Anisotropic Phenomena at Interfaces in Bismuth-Saturated Copper," Scripta Materialia, 50 (2004) 565-569.
2004.02: C.-S. Kim and G.S. Rohrer, "Geometric and Crystallographic Characterization of WC Surfaces and Grain Boundaries in WC-Co Composites," Interface Science, 12 (2004) 19-27.
2004.03: D.M. Saylor, B.S. El-Dasher, T. Sano, and G.S. Rohrer, "Distribution of Grain boundaries in SrTiO3 as a Function of Five Macroscopic Parameters," J. Amer. Ceram. Soc., 87 (2004) 670-676.
2004.04: D.M. Saylor, B.S. El-Dasher, Y. Pang, H.M. Miller, P. Wynblatt, A.D. Rollett, and G.S. Rohrer, "Habits of Grains in Dense Polycrystalline Solids," J. Amer. Ceram. Soc., 87 (2004) 724-726.
2004.05: G.S. Rohrer, D.M. Saylor, B.S. El-Dasher, B.L. Adams, A.D. Rollett, and P. Wynblatt, "The Distribution of Internal Interfaces in Polycrystals," Zeitschrift fur Metallkunde, 95 (2004) 197-214.
2004.06: A.D. Rollett, G. Gottstein, L. Shvindlerman, and D. Molodov, "Grain Boundary Mobility - a Brief Review," Zeitschrift fur Metallkunde, 95 (2004) 226-229.
2004.07: D.M. Saylor, B.S. El Dasher, A.D. Rollett, and G.S. Rohrer, "Distribution of Grain Boundaries in Aluminum as a Function of Five Macroscopic Parameters," Acta Materialia, 52 (2004) 3649-3655.
2004.08: D.M. Saylor, B.L. Adams, and G.S. Rohrer, "Measuring the Five Parameter Grain Boundary Distribution From Observations of Planar Sections," Metallurgical and Materials Transactions, 35A (2004) 1981-1989.
2004.09: D.M. Saylor, J. Fridy B.S. El-Dasher, K.-Y. Jung and A.D. Rollett, "Statistically Representative Three-Dimensional Microstructures Based on Orthogonal Observation Sections," Metallurgical and Materials Transactions, 35A (2004) 1969-1979.
2004.10: R.J. Larsen and B.L. Adams, "New Stereology for the Recovery of Grain Boundary Plane Distributions in the Crystal Reference Frame," Metallurgical and Materials Transactions, 35A (2004) 1991-1998.
2004.11: D. Kinderlehrer, J. Lee, I. Livshits, and S. Ta'asan, "Mesoscale Simulation of Grain Growth," in Continuum Scale Simulation of Engineering Materials: Fundamentals - Microstructures - Process Applications, eds. D. Raabe, F. Roters, F. Barlat, L.-Q. Chen, Wiley-VCH Verlag Berlin GmbH & Co. (2004) pp. 356-367.
2004.12: A.D. Rollett, D. Saylor, J. Fridy, B.S. El-Dasher, A. Brahme, S.-B. Lee, C. Cornwell, and R. Noack, "Modeling Polycrystalline Microstructures in 3D", in CP712, Materials Processing and Design: Modeling, Simulation, and Applications, NUMIFORM 2004, eds. S. Ghosh, J.C. Castro, J.K. Lee, American Institute of Physics. (2004) pp. 71-77.
2004.13: G.S. Rohrer, B.S. El Dasher, H.M. Miller, A.D. Rollett, and D.M. Saylor, "Distribution of Grain Boundary Planes at Coincident Site Lattice Misorientations," Mat. Res. Soc. Symp. Proc., 819 (2004) N7.2.
2004.14: K. Barmak, W.E. Archibald, A.D. Rollett, S. Ta'asan, and D. Kinderlehrer, "Grain Boundary Properties and Grain Growth: Al Foils, Al Films," Mat. Res. Soc. Symp. Proc., 819 (2004) N6.6.
2004.15: M.L. Taheri, A.D. Rollett, and H. Weiland, "In-Situ Investigation of Grain Boundary Mobility and Character in Aluminum Alloys in the Presence of a Stored Energy Driving Force," Mat. Res. Soc. Symp. Proc., 819 (2004) N6.5.
2004.16: H.M. Miller, D.M. Saylor, B.S. El Dasher, A.D. Rollett, and G.S. Rohrer, "Crystallographic Distribution of Internal Interfaces in Spinel Polycrystals," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 783-788.
2004.17: T.A. Bennett, C.-S. Kim, G.S. Rohrer, and A.D. Rollett, "Five-Parameter Grain Boundary Character Distribution in Fe-1%Si," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 1057-1062.
2004.18: D. Kinderlehrer, I. Livshits, G.S. Rohrer, S. Ta'asan, and P. Yu, "Mesoscale Simulation of the Evolution of the Grain Boundary Character Distribution," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 1063-1068.
2004.19: J. Gruber, D.C. George, A.P. Kuprat, G.S. Rohrer, and A.D. Rollett, "Effect of Anisotropic Interfacial Energy on Grain Boundary Distributions During Grain Growth," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 733-738.
2004.20: D. Kinderlehrer, J. Lee, I. Livshits, A.D. Rollett, and S. Ta'asan, "Mesoscale Simulation of Grain Growth," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 1057-1062.
2004.21: F. Papillon, P. Wynblatt, and G.S. Rohrer, "Segregation of Calcium to Magnesium Oxide Grain Boundaries," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 789-794.
2004.22: M.L. Taheri, A.D. Rollett, and H. Weiland, "In-Situ Quantification of Solute Effects on Grain Boundary Mobility and Character in Aluminum Alloys During Recrystallization," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 997-1002.
2004.23: L.S. Shvindlerman, G. Gottstein, A. D. Rollett, "The Von Neumann-Mullins Theory of Grain Growth - Valid or Not?!," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 1111-1116.
2004.24: M.H. Alvi, S. Cheong, H. Weiland, A.D. Rollett, "Recrystallization and Texture Development in Hot Rolled 1050 Aluminum," Proc. 2nd Intl. Conf. on Recrystallization and Grain Growth, B. Bacroix, J.H. Driver, R. Le Gall, Cl. Maurice, R. Penelle, H. Réglé, and L. Tabourot, eds., Annecy, France, August 2004, Materials Science Forum 467-470 (2004) 357-362.
2004.25: A.D. Rollett, P. Manohar, "Monte Carlo Modeling of Grain Growth and Recrystallization", chapter 4 in a book entitled "Continuum Scale Simulation of Engineering Materials" edited by D. Raabe and F. Roters, Wiley-VCH, (2004) 855pp.
2004.26: J.-H. Cho, A.D. Rollett, K.H. Oh, "Determination of Volume Fractions of Texture Components with Standard Distributions in Euler Space," Metallurgical & Materials Transactions 35A (2004) 1075-1086.
2004.27: G. Gottstein, A.D. Rollett, L.S. Shvindlerman, "On the Invalidity of the von Neumann-Mullins Relation", Scripta Mater. 51 (2004) 611-616.
2004.28: Y.-S. Choi, H.R. Piehler, A.D. Rollett, "Formation of Meso-Scale Roughening in 6022-T4 Al Sheets Deformed in Plane-Strain Tension", Metallurgical & Materials Transactions 35A (2004) 513-524.
2004.29: P. Yu and S. Ta'asan, "Bridging Micro and Macro Scales in Fluids", in Continuum Models and Discrete Systems, D. Bergman & E. Inan, Eds. Kluwer (2004) 299-310.
2004.30: G.S. Thompson, P.A. Henderson, M.P. Harmer, G.C. Wei, W.H. Rhodes, "Conversion of Polycrystalline Alumina to Single Crystal Sapphire by Localized Co-Doping with Silica," J. Am. Ceram. Soc. 87 (2004) 1879-1882.
2004.31: A.J. Francis and P.A. Salvador, "Chirally Oriented Heteroepitaxial Thin Films Grown by Pulsed Laser Deposition: Pt(621) on SrTiO3(621)," J. Appl. Phys. 96 (2004) 2482-2493.
2004.32: M.L. Taheri, Eric Stach, V.R. Radmilovic, H. Weiland and A.D. Rollett, "In-Situ Electron Microscopy Studies of the Effect of Solute Segregation on Grain Boundary Anisotropy and Mobility in an Al-Zr Alloy," Mat. Res. Soc. Symp. Proc. 839 (2004) P7.7.
2003
2003.01: S. Mahadevan and D. Casasent, "Automated Image Processing for Grain Boundary Analysis," Ultramicroscopy, 96 (2003) 153-162.
2003.02: B. S. El-Dasher, B. L. Adams, and A. D. Rollett, "Viewpoint: Experimental Recovery of Geometrically-Necessary Dislocation Density in Polycrystals" Scripta Materialia, 48 (2003) 141-145.
2003.03: M. C. Demirel, A. P. Kuprat, D. C. George, and A. D. Rollett "Bridging Simulations and Experiments in Microstructure Evolution," Physical Review Letters, 90 (2003) 016106.
2003.04: J.-H. Cho, J.S. Cho, J.T. Moon, J. Lee, Y.H. Cho, A.D. Rollett and K.H. Oh, "Recrystallization and Grain Growth of Gold Bonding Wire", Metallurgical & Materials Transactions, 34A (2003) 1113.
2003.05: P. Wynblatt, G.S. Rohrer and F. Papillon, "Grain Boundary Segregation in Oxide Ceramics," J. Eur. Ceram. Soc., 23 (2003) 2841-2848.
2003.06: J.L. Giocondi and G.S. Rohrer, "Orientation Dependence of Photochemical Reduction Reactions on SrTiO3 Surfaces," Mat. Res. Soc. Symp. Proc., (Mater. Res. Soc. Proc. 751, Pittsburgh, PA, 2003) 19-24.
2003.07: J.L. Giocondi, A.M. Zimbouski, and G.S. Rohrer, " Photochemical Reactivity of Sr2Nb2O7 and Sr2Ta2O7 as a Function of Surface Orientation," Mat. Res. Soc. Symp. Proc., (Mater. Res. Soc. Proc. 755, Pittsburgh, PA, 2003) 315-20.
2003.08: J.L. Giocondi, S. Samadzadeh, and G.S. Rohrer, "Orientation Dependence of the Photochemical Reactivity of BaTi4O9," Mat. Res. Soc. Symp. Proc., (Mater. Res. Soc. Proc. 755, Pittsburgh, PA, 2003) 221-6.
2003.09: D.M. Saylor, A. Morawiec, and G.S. Rohrer, "Distribution of Grain boundaries in Magnesia as a Function of Five Macroscopic Parameters," Acta Mater., 51 (2003) 3663-3674.
2003.10: D.M. Saylor, A. Morawiec, and G.S. Rohrer, "The Relative Free Energies of Grain boundaries in Magnesia as a Function of Five Macroscopic Parameters," Acta Mater., 51 (2003) 3675-3686.
2003.11: S.W. Cheong, E.J. Hilinski, and A.D. Rollett, "Effect of temper rolling on texture formation in a Low-Loss Cold-Rolled Motor-Lamination Steel", Metallurgical & Materials Transactions, 34A, (2003) 1311-1319.
2003.12: S.W. Cheong, E.J. Hilinski, and A.D. Rollett, "Secondary Recrystallization in a Low-Loss Cold-Rolled Motor-Lamination Steel", Metallurgical & Materials Transactions, 34A, (2003) 1321-1327.
2003.13: A. Asthagiri, C. Niederberger, A.J. Francis, L. Porter, P.A. Salvador and D. S. Sholl, "Thin Pt films on the polar SrTiO3(111) surface: an experimental and theoretical study", Surface Science, 537, (2003) 134-152.
2003.14: E.A. Holm, M.A. Miodownik and A.D. Rollett, "On abnormal subgrain growth and the origin of recrystallization nuclei," Acta Materialia, 51 (2003) 2701-2716.
2003.15: T. Sano, D.M. Saylor, and G.S. Rohrer, "Surface Energy Anisotropy of SrTiO3 at 1400 °C in Air," J. Amer. Ceram. Soc., 86 (2003) 1933-1939.
2003.16: S.B. Lee, J.M. Rickman and K. Barmak, "Phase transformation kinetics and self-patterning in misfitting thin film," Acta Materialia, 51 (2003) 6415-6427.
2003.17: K. Barmak, A. Gungor, A. D. Rollett, C. Cabral, Jr., and J. M. E. Harper, "Texture of Cu and dilute binary Cu-alloy films: Impact of annealing and solute content," Mater. Sci. in Semicon. Processing, 6 (2003) 175-184.
2003.18: C.M.B. Bacaltchuk, G.A. Castello-Branco, M. Ebrahimi, H. Garmestani, A.D. Rollett, "Effect of Magnetic Field Applied During Secondary Annealing on Texture and Grain size of Silicon Steel", Scripta Materiala, 48 (2003) 1343-1347.
2003.19: A.D. Rollett, "Sensitivity of texture development during grain growth to anisotropy of grain boundary properties," in Thermodynamics, Microstructures and Plasticity, Proceedings of the NATO Advanced Study Institute, September, 2002, Fréjus, France; A. Finel et al., eds., published by Kluwer Academic Publishers, (2003) 123-133.
2003.20: P.A. Manohar, A.D. Rollett, "Asynchronous Parallel Potts Model for Simulation of Grain Growth", 'Materials Science and Technology (MS & T '03)' conference incorporating 'Modeling, Microstructure and Control in Ferrous and Non-Ferrous Industry' symposium, ed. F. Kongoli et al., TMS and ISS, Chicago, Nov. 9 - 12, (2003) pp. 399-412.
2003.21: P. A. Manohar, K-H Lim, A. D. Rollett, "Simulation of Microstructural Evolution in Wire Rod Rolling of Medium C-Mn Steel", Materials Science Forum, 426 - 432, (2003) 3789-3794.
2003.22: K-H Lim, P. A. Manohar, D. Lee, Y. C. Yoo, C. M. Cady, G. T. Gray III, A. D. Rollett, C-Mn Steel", "Constitutive Modeling of High Temperature Mechanical Behavior of a Medium C-Mn Steel," Materials Science Forum, 426 - 432, (2003) 3903-3908.
2003.23: A. Brahme, D.M. Saylor, J.Fridy, A.D. Rollett, "Statistically Representative Three-Dimensional Microstructures for Modeling Microstructural Evolution in Aluminum ," Proc. 1st Intl. Symp. on Metallurgical Modeling for Aluminum Alloys, Materials Solutions Conference 2003, Pittsburgh, (2003) pp. 163-168.
2003.24: A M.H. Alvi, S. Cheong, H. Weiland, A.D. Rollett, "Microstructural evolution during recrystallization in hot rolled Aluminum Alloy 1050," Proc. 1st Intl. Symp. on Metallurgical Modeling for Aluminum Alloys, Materials Solutions Conference 2003, Pittsburgh, (2003) 191-197.
2003.25: P.A. Manohar, K.-H. Lim, A.D. Rollett, Y. Lee, "Computational exploration of microstructural evolution in a medium C-Mn steel and applications to rod mill," ISIJ International 43 (2003) 1421-1430.
2003.26: S. Ta'asan, I. Livshits, and D. Kinderlehrer "From deterministic curvature driven grain growth to stochastic models", in Computational Fluid and Solid Mechanics K.J. Bathe (Editor), Elsevier Science, 2003.
2003.27: S. Ta'asan, P. Yu, I. Livshits, D. Kinderlehrer, J. Lee,. "Multiscale Modeling and Simulation of Grain Bounday Evolution", Proceedings of the 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, April 7-10, 2003.
2003.28: P. Yu and S. Ta’asan "Large scale limit of Monte-Carlo simulations of grain growth," Computational Fluid and Solid Mechanics, K.J. Bathe, Editor, Elsevier Science 2003.
2002
2002.01: R. J. Larsen and B. L. Adams, "New stereology for recovering grain boundary character distributions in the crystal frame," in Proceedings of Plasticity '02, eds. A. S. Khan and O. Lopez-Pamies, Neat Press, MD, 2002, pp. 27-29.
2002.02: A.D. Rollett, M.L. Taheri, B.S. El-Dasher, "Texture Dependent Measurement of Crystallization Kinetics Using electron Backscatter Diffraction," in Proceedings of Plasticity '02, eds. A. S. Khan and O. Lopez-Pamies, Neat Press, MD, 2002, pp. 42-44.
2002.03: C.T. Wu, B.L. Adams, D. Casasent, S. Ozdemir, and A. Talukder, "Mapping the mesoscale interface structure in polycrystalline materials", Ultramicroscopy, 93 (2002) 99-109.
2002.04: G.S. Rohrer, C.L. Rohrer, and W.W. Mullins, "Coarsening of Faceted Crystals," J. Amer. Ceram. Soc., 85 (2002) 675-82.
2002.05: M. C. Demirel, A. P. Kuprat, D. C. George, G. K. Straub, and A. D. Rollett, "Linking Experimental Characterization and Computational Modeling of Grain Growth in Al-Foil," Interface Science 10 (2002) 137-141.
2002.06: D. Kinderlehrer, I. Livshits, D. Mason, and S. Ta'asan, "The surface energy of MgO: Multiscale reconstruction from thermal groove geometry," Interface Science 10 (2002) 233-242.
2002.07: D.M. Saylor, A. Morawiec, G.S. Rohrer, "Distribution and Energies of Grain Boundaries in Magnesia as a Function of Five Degrees of Freedom," J. Amer. Ceram. Soc., 85 (2002) 3081-3.
2002.08: D.M. Saylor and G.S. Rohrer, "Determining Crystal Habits from Observations of Planar Sections," J. Amer. Ceram. Soc., 85 (2002) 2799-804.
2002.09: A.D. Rollett, "A New Representation of Grain Boundary Properties," 8th International Conference on Aluminum and its Alloys (ICAA8), Materials Science Forum, 396-402, (2002) 593.
2002.10: P.S. Lee, H.R. Piehler, A.D. Rollett and B.L. Adams, "Texture Clustering and Long-Range Disorientation Representation Methods: Application to 6022 Aluminum Sheet," Met. Trans. A, 33 (2002) 3709.
2002.11: A.D. Rollett, "Texture Development Dependence on Grain Boundary Properties," Proceedings of ICOTOM 13, Seoul, Aug. 2002, Materials Science Forum 408-412, (2002) pp. 251-256.
2002.12: Jae-Hyung Cho, J.S. Cho, J.T. Moon, J. Lee, Y.H. Cho, A.D. Rollett, and K.H. Oh, "Characterization of Cold Drawn Gold Bonding Wire with EBSD", Proceedings of ICOTOM 13, Seoul, Aug. 2002, Materials Science Forum 408-412, (2002) pp. 499-504.
2002.13: D.M.Saylor, A.Morawiec, K.W.Cherry, F.H.Rogan, G.S.Rohrer, S.Mahadevan, and D.Casasent, "Crystallographic Distribution of Low Angle Grain Boundary Planes in Magnesium Oxide," Proceedings of ICOTOM 13, Seoul, Aug. 2002, Materials Science Forum 408-412, (2002) pp. 1705-1710.
2002.14: A. Gungor, K. Barmak, A. D. Rollett, C. Cabral, Jr., and J. M. E. Harper, "Texture of Cu and Dilute Binary Cu(Ti) and Cu(In) Thin Films," Proceedings of ICOTOM 13, Seoul, Aug. 2002, Materials Science Forum 408-412, (2002) pp. 1567-1572.
2002.15: S. Mahadevan and D. Casasent, "Detection of Sample Parameters in secondary Electron Microscope Images (Test Results)" Info in Proc. SPIE, Vol. 4735, April 2002, pp. 104-112.
2002.16: B. S. El-Dasher, B. L. Adams and A. D. Rollett, "Advances in Experimental Method and Analysis for Estimation of Geometrically Necessary Dislocations", Proceedings of the 1st French Russian on Physics and Mechanics of Large Plastic Strains, St. Petersburg, Russia, June 2002.
2002.17: A. Gungor, K. Barmak, A.D. Rollett, C. Cabral, Jr., and J.M.E. Harper, "Texture and Resistivity of Binary Cu(Al), Cu(In), Cu(Ti), Cu(Nb), Cu(Ir) and Cu(W) Alloy Thin Films," J. Vac. Sci. Technol. B, 20 (2002) 2314.
2002.18: K. Barmak, A. Gungor, A. D. Rollett, C. Cabral, Jr., J. M. E. Harper, "Texture and resistivity of Cu and dilute Cu alloy films", Mat. Res. Soc. Symp. Proc., (Mater. Res. Soc. Proc. 721, Pittsburgh, PA, 2002) 51-59 (invited).
2002.19: Gungor, K. Barmak, A. D. Rollett, C. Cabral, Jr., and J. M. E. Harper, "Cu and dilute binary Cu(Ti), Cu(Sn) and Cu(Al) thin films: texture, grain growth and resistivity, Mat. Res. Soc. Symp. Proc., (Mater. Res. Soc. Proc. Spring 2002, Pittsburgh, PA, 2002).
2002.20: Ryan J. Larsen and Brent L. Adams, "Stereology for Recovering Grain Boundary Plane Distributions in the Crystal Frame," Proceedings of ICOTOM 13, Seoul, Aug. 2002, Materials Science Forum 408-412, (2002) pp. 125-130.
2002.21: A.J. Henrie, B.L. Adams and R.J. Larsen "Creating a model for percolation of grain boundaries in polycrystalline materials" Proceedings of ICOTOM 13, Seoul, Aug. 200, Materials Science Forum 408-412, (2002) pp. 419-424.
2002.22: K. Okuda and A.D. Rollett " Monte Carlo simulation of abnormal grain growth during nucleation" Proceedings of ICOTOM 13, Seoul, Aug. 2002, Materials Science Forum 408-412, (2002) pp. 413-418.
2002.23: J.-H. Cho, S.-J. Park. S.-H. Choi and K.H. Oh "Deformation Texture of cold drawn Al 6063 Tube" Proceedings of ICOTOM 13, Seoul, Aug. 2002, Materials Science Forum 408-412, (2002) pp. 565-570.
2002.24: M.C. Demirel, D.C. George, and A.D. Rollett, and B.R. Schlei " Finite Element 3D Mesh Generation From Experimental Microstructures", submitted to Modeling and Simulation in Materials Science and Engineering (MSMSE) (2002).
2002.25: J.H. Su, S.L Atwell, O. Castillo, S.M. Durbin, P.A. Salvador, P. V. P. S. S. Sastry, and J. Schwartz, "Growth of superconducting (Hg,Re)Ba2CaCu2Oy thin films on Ag by pulsed laser deposition," Physica C, 372-376 (2002) 782-785.
2002.26: A.J. Francis and P.A. Salvador, "Synthesis Structures, and Physical Properties of Yttrium-Doped Strontium Manganese Oxide Films," Mat. Res. Soc. Symp. Proc., 718 (2002) D.9.4.1-D.9.4.6.
2001
2001.01: W.W. Mullins "Capillary-Induced Surface Morphologies," Interface Science, 9 (2001) 9-20. (invited).
2001.02: D.M. Saylor and G.S. Rohrer, "Evaluating Anisotropic Surface Energies Using the Capillarity Vector Reconstruction Method," Interface Science, 9 (2001) 35-42. (invited).
2001.03: S. Mahadevan and D. Casasent, "Detection of Triple Junction Parameters in Microscope Images," Proc. SPIE, 4387 April (2001) pp. 204-214.
2001.04: A.D. Rollett, and D. Raabe, "A Hybrid Model for Mesoscopic Simulation of Recrystallization", Computational Materials Science, 21 (2001) 69-78.
2001.05: H. Garmestani, S. Lin, S. Ahzi, and B. L. Adams, "Statistical Continuum Theory for large Plastic Deformation of Polycrystalline Materials," J. Mech. Phys. Solids 49 (2001) 589-607.
2001.06: G.S. Rohrer, "The Anisotropy of Metal Oxide Surface Properties," in Chemical Physics of Solid Surfaces: Vol 9: Oxide Surfaces, edited by D. P. Woodruff. (Elsevier, 2001) pp. 485-513 (invited).
2001.07: D. Kinderlehrer and C. Liu, "Evolution of Grain Boundaries," Mathematical Methods and Modelling in the Applied Sciences, 4 (2001) 713-729.
2001.08: C.-C. Yang, A. D. Rollett and W. W. Mullins, "Measuring Relative Grain Boundary Energies and Mobilities in an Aluminum Foil from Triple Junction Geometry," Scripta Met., 44 (2001) 2735-40.
2001.09: G.S. Rohrer, C.L. Rohrer, and W.W. Mullins,"Nucleation Energy Barriers for Volume Conserving Shape Changes of Crystals with Nonequilibrium Morphologies," J. Amer. Ceram. Soc., 84 (2001) 2099-104.
2001.10: V.R. Vedula, S.J. Glass, D.M. Saylor, G.S. Rohrer, W.C. Carter, and S.A. Langer, "Residual Stress Predictions in Polycrystalline Alumina," J. Amer. Ceram. Soc., 84 (2001) 2947-54.
2001.11: J.L. Giocondi and G.S. Rohrer, "Photochemical Reduction and Oxidation Reactions on Barium Titanate Surfaces," Mat. Res. Soc. Symp. Proc., (Mater. Res. Soc. Proc. 654, Pittsburgh, PA, 2001) AA7.4.1-10.
2001.12: D. Kinderlehrer, I. Livshits, F. Manolache, A.D. Rollett, S. Ta'asan, "An Approach to the Mesoscale Simulation of Grain Growth," Mat. Res. Soc. Symp. Proc., (Mater. Res. Soc. Proc. 652, Pittsburgh, PA, 2001) Y1.5 (invited).
2001.13: M.C. Demirel, A.P. Kuprat, D.C. George, B. El-Dasher, N.N. Carlson, G.K. Straub, A.D. Rollett," Comparison of Experimental and Computational Aspects of Grain Growth in Al-Foil," Mat. Res. Soc. Symp. Proc., (Mater. Res. Soc. Proc. 652, Pittsburgh, PA, 2001) p. Y1.8.
2001.14: E.M. Lauridsen, S. Schmidt, R.M. Suter, and H.F. Poulsen, "Tracking: a Method for Structural Characterization of Grains in Powders or Polycrystals", J. Appl. Cryst., 34 (2001) 744-750.
2001.15: Poulsen, S.F. Nielsen, E.M. Lauridsen, S. Schmidt, R.M. Suter, U. Lienert, L. Margulies, T. Lorentzen and D. Juul Jensen, "Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders," J. Appl. Cryst., 34 (2001) 751-756.
2001.16: D.M. Saylor, A. Morawiec, K.W. Cherry, F.H. Rogan, G.S. Rohrer, S. Mahadevan, and D. Casasent, "Crystallographic Distribution of Grain Boundaries in Magnesium Oxide," Proceedings of the First Joint International Conference on Grain Growth, Aachen, Germany, Eds. G. Gottstein and D.A. Molodov (Springer Verlag, 2001) 449-454.
2001.17: G. S. Rohrer and W. W. Mullins, "Energy Barriers for the Morphological Evolution and Coarsening of Faceted Crystals," Proceedings of the First Joint International Conference on Grain Growth, Aachen, Germany, Eds. G. Gottstein and D.A. Molodov (Springer Verlag, 2001) 321-326.
2001.18: D.M. Saylor, K.W. Cherry, and G.S. Rohrer, "Capillarity Vector Reconstruction of the Relative Energies of [0001] Tilt Boundaries in Alumina," Proceedings of the First Joint International Conference on Grain Growth, Aachen, Germany, Eds. G. Gottstein and D.A. Molodov (Springer Verlag, 2001) 429-434.
2001.19: M.C. Demirel, A.P. Kuprat, D.C. George, B.S. El-Dasher, G.K. Straub, and A.D. Rollett, "Experimental Verification of Finite Element Simulation of Curvature Driven Grain-Growth in Al-foil," Proceedings of the First Joint International Conference on Grain Growth, Aachen, Germany, Eds. G. Gottstein and D.A. Molodov, (Springer Verlag, 2001) pp. 297-302.
2001.20: K. Okuda and A.D. Rollett, "Monte Carlo Simulation of Recrystallization and grain Growth in Steels: Preliminary Results," Proceedings of the First Joint International Conference on Grain Growth, Aachen, Germany, Eds. G. Gottstein and D.A. Molodov, (Springer Verlag, 2001) pp 1007-1012.
2001.21: A.D. Rollett, C-C. Yang, W.W. Mullins, B.L. Adams, C-T Wu, D. Kinderlehrer, S. Ta’asan, F. Manolache, C. Liu, I. Livshits, D. Mason, A. Talukder, S. Ozdemir, D. Casasent, A. Morawiec, D. Saylor, G.S. Rohrer, M. Demirel, B. El-Dasher, and W. Yang, "Grain Boundary Property Determination though Measurement of Triple Junction Geometry and Crystallography," Proceedings of the First Joint International Conference on Grain Growth, Aachen, Germany, Eds. G. Gottstein and D.A. Molodov, (Springer Verlag, 2001) pp 165-175.
2001.22: P. Wynblatt and M. Takashima, "An empirical model of grain boundary energy and its application to grain boundary wetting," in Proceedings of the 3rd International Conference on High Temperature Capillarity, Eds. N. Eustathopoulos, K. Nogi and N. Sobczac, Trans. JWRI vol. 30, (2001) pp. 11-20.
2001.23: P. Wynblatt and M. Takashima, "Correlation of grain boundary character with wetting behavior," Proceedings of IIB 2001, Eds. W.D. Kaplan and E. Rabkin, Interface Science, 9 (2001) 265-263.
2001.24: D. Kinderlehrer, editor, Hans Lewy Selecta, volumes I and II, Birkhauser, 2001.
2001.25: T.-D. Doan, J.L. Giocondi, G.S. Rohrer, and P.A. Salvador, "Surface Engineering Along the Close-Packed Direction of Perovskite Oxides," J. Crystal Growth 225 (2001) 178-182.
2001.26: Y. Choi, H.R. Piehler, L.G. Hector and A.D. Rollett. "Quantification of deformation-induced surface roughnening using modified roughness parameters and Fourier filtering," In Second global symposium on innovations in materials process & manufacturing, (M.Y. Demeri, ed.) New Orleans (TMS) (2001), pp. 209-218.
2001.27: L. Dong, D.J. Srolovitz, G.S. Was, Q. Zhao and A.D. Rollett, "Combined out-of-plane and in-plane texture control in thin films using ion beam assisted deposition," J. Mater. Res., 16 (2001) 210-216.
2001.28: A. D. Rollett, M. L. Storch, E. J. Hilinski and S. R. Goodman, "Approach to Saturation in Textured Soft Magnetic Materials", Metallurgical & Materials Transactions, 32A (10), (2001) 2595-2603A.
2001.29: T.-D. Doan, C. Abramowski and P.A. Salvador, "Stability and Structural Characterization of Epitaxial NdNiO3 Films Grown by Pulsed Laser Deposition", in Solid State Chemistry of Inorganic Materials III, eds. M. J. Geselbracht, J. E. Greedan, D. C. Johnson and M.A. Subramanian, Materials Research Society (Pittsburgh, PA), (2001) GG3.27.1-6.
2000
2000.01: D.M. Saylor, A. Morawiec, B.L. Adams, and G.S. Rohrer, "Misorientation Dependence of the Grain Boundary Energy in Magnesia," Interface Science, 8 (2000) 131-140.
2000.02: M. Takashima, A.D. Rollett, and P. Wynblatt, "A Representation Method For Grain Boundary Character," Phil. Mag., 80 (2000) 2457-65.
2000.03: M. Takashima, P. Wynblatt, and B.L. Adams, "Correlation of Grain Boundary Character with Wetting Behavior," Interface Science, 8 (2000) 251-361.
2000.04: D.M. Saylor, D.E. Mason, and G.S. Rohrer, "Experimental Method for Determining Surface Energy Anisotropy and its Application to Magnesia," J. Amer. Ceram. Soc. 83 (2000) 1226-32.
2000.05: S. Sun, B.L. Adams, and W. King "Observations of Lattice Curvature Near the Interface of a Deformed Aluminum Bicrystal," Phil. Mag.A, 80 (2000) 9-25.
2000.06: W.W. Mullins and G.S. Rohrer, "Nucleation Barrier for Volume Conserving Shape Changes of Faceted Crystals," J. Amer. Ceram. Soc. 83 (2000) 214-16.
2000.07: A.J. Francis, A. Bagal and P.A. Salvador, "Thin Film Synthesis of Metastable Perovskites: YMnO3" in Innovative Processing and Synthesis of Ceramics, Glasses and Composites, N. Bansal, Eds., (The American Ceramic Society, Inc., Westerville, OH, 2000) pp. 565-75.
2000.08: A. Morawiec, "Method to Calculate the Grain Boundary Energy Distribution over the Space of Macroscopic Boundary Parameters from the Geometry of Triple Junctions," Acta Mater., 48 (2000) 3525-32.
2000.09: Demirel, M. C., El-Dasher, B.S., Adams, B.L., and Rollett, A.D., Studies on the Accuracy of Electron Backscatter Diffraction Measurements, Crystallography of Automated Electron Backscatter Diffraction, Edited by A.J. Schwartz, Kluwer Academic/Plenum Publishers, 2000. Ch. 6, pp. 65-74.
2000.10: B. L Adams, B. Henrie, L. Howell, and R. Balling, "Structure-Properties Relations: EBSD-Based Material-Sensitive Design," in Electron Backscatter Diffraction in Materials Science, eds. A. J. Schwartz, M. Kumar, and B. L. Adams, Kluwer Scientific /Plenum Publishers, New York (2000) p. 171-180. (invited)
2000.11: C.-C. Yang, W. W. Mullins and A. D. Rollett, "Measuring relative grain boundary energies and mobilities in an aluminum foil from triple junction geometry", in 21st Risø International Symposium on Materials Science: "Recrystallization - Fundamental aspects and relations to deformation microstructure," N. Hansen et al., eds., Risø Natl. Lab., Roskilde, Denmark (2000) pp 659-664.
2000.12: J. Kapur and D. Casasent, "Geometric correction of SEM images", Proc. SPIE, Vol. 4044, pp. 165-176, April 2000.
2000.13: B.L. Adams, B. Henrie, and A. Goyal, "Microstructure-Sensitive Compliant Mechanism Design," in Plastic and Viscoplastic Response of Materials and Metal Forming, eds. A. S. Khan, H. Zhang, and Y. Yuan, NEAT Press, Fulton, MD (2000) p. 513-515 (invited)
2000.14: H. Garmestani, S. Lin, and B.L. Adams, "Statistical Continuum Theory for Inelastic Behavior of a Two-Phase Medium," Int. J. Solids and Structures 37 (2000) p. 423-434.
2000.15: A. Morawiec, "Grain Misorientations in Theories of Abnormal Grain Growth in Silicon Steel," Scripta Mater. 42 (2000) 275-8.
1999
1999.01: D.M. Saylor and G.S. Rohrer, "Measuring the Influence of Grain Boundary Misorientation on Thermal Groove Geometry in Ceramic Polycrystals," J. Amer. Ceram. Soc. 82 (1999) 1529-1536.
1999.02: B.L. Adams, "Advances in the Mesoscale Approach to Structure-Sensitive Properties Relations in Polycrystalline Materials," Textures and Microstructures, 32 (1999) 3-20.
1999.03: B.L. Adams, "Quantitative Representation of the Mesostructure of Polycrystalline Materials," Invited chapter in Mechanics and Materials: Fundamentals and Linkages (eds. M. A. Meyers, R. W. Armstrong and H. Kirchner) John Wiley & Sons (1999) 429-450.
1999.04: A. Morawiec, "Automatic Orientation Determination from Kikuchi Patterns", J.Appl.Cryst., 32 (1999) 788-798.
1999.05: A. Morawiec, "Calculation of Distribution of Grain Boundary Energy Over Grain Misorientations," Scripta Mat., 41 (1999) 13-18.
1999.06: S. Ozdemir and D. Casasent, "Scale-Space Median and Gabor Filtering for Boundary Detection in Electron Microscopy Images," Proc. SPIE, 3715 (1999) 289-300.
1999.07: P.S. Lee, A.D. Rollett, B.L. Adams, "Development of disorientation correlation function," in "The Integration of Material, Process and Product Design", Zabaras et al. eds., Balkema , Rotterdam (1999) pp 33-38.
1999.08: S.J. Glass, V.R. Vedula, D.M. Saylor, and G.S. Rohrer, "Application of Electron Backscattered Diffraction (EBSD) and Atomic Force Microscopy (AFM) to Determine Texture, Microtexture, and Grain Boundary Energies in Ceramics," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 1489-1494.
1999.09: V.R. Vedula, S.J. Glass, D.M. Saylor, G.S. Rohrer, and W.C. Carter, "Predicting Microstructural-level Residual Stresses and Crack Paths in Ceramics," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 1507-1512.
1999.10: M. Takashima, A.D. Rollett, P. Wynblatt, and B L. Adams. "Correlation of Grain Boundary Character with Wetting Behavior," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 1649-1654.
1999.11: B.S. El-Dasher, W. Yang, and B.L. Adams, "Experimental Approach to Contunuum Dislocation Fields in <100> Polycrystalline Columnar Aluminum," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 1248-1253.
1999.12: D.M. Saylor, G.S. Rohrer, and D.E. Mason, "Determining Surface Energy Anisotropy from Measurements of Thermal Groove Geometry," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 1637-1642.
1999.13: A. Morawiec and D. Saylor, "Registry between Sections in Precision Sectioning of Pollycrystalline Materials," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 198-203.
1999.14: D.M. Saylor and G.S. Rohrer "Determining Relative Grain Boundary Energies from Measurements of Thermal Groove Geometry," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 1690-1695.
1999.15: D.M. Saylor, G.S. Rohrer, and D.E. Mason, "Determining Surface Energy Anisotropy from Measurements of Thermal Groove Geometry," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 1637-1642.
1999.16: W. Yang, B.L. Adams and M. DeGraef, "Adaptive Orientation Imaging Microscopy," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 192-197.
1999.17: A. Morawiec, "Reliability of Automatic Orientation Determination from Kikuchi Patterns," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 62-67.
1999.18: B.L. Adams, C.L. Bauer, D. Casasent, B. El-Dasher, D. Kinderlehrer, I. Livshits, F. Manolache, D. Mason, A. Morawiec, W.W. Mullins, S. Ozdemir, H. Rogan, G. Rohrer, A.D. Rollett, D. Saylor, S. Ta’asan, A. Talukder, C-T Wu, C-C. Yang, and W. Yang "Extraction of Grain Boundary Energies from Triple Juinction Geometry," (Invited paper) Proceedings of ICOTOM-12, Montréal, Canada, (1999) 9-18.
1999.19: P.S. Lee, A.D. Rollett, and B.L. Adams "Development and Application of a Disorientation Correlation Function," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 21-28.
1999.20: B.L. Adams, P.S. Lee, and A.D. Rollett "Spatial Correlations of Orientation, Orientation Clustering and the Variance of the Orientation Distribution Function," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 724-729.
1999.21: D. Kinderlehrer, I. Livshits, S. Ta'asan, and D.E. Mason, "Multiscale Reconstruction of Grain Boundary Energy from Microstructure," Proceedings of ICOTOM-12, Montréal, Canada, (1999) 1643-1648.
1999.22: A.D. Rollett and D. Raabe, "A Hybrid Model for Mesoscopic Simulation of Recrystallization," Proceedings of the Fourth Intl. Conf. on Recrystallization and Related Phenomena, Tsukuba, Japan, Edited by T. Sakai and H.G. Suzuki (1999) 625-632. (Invited paper)
1999.23: B.L. Adams, D. Kinderlehrer, I. Livshits, D.E. Mason, W.W. Mullins, G.S. Rohrer, A.D. Rollett, D.M. Saylor, S. Ta'asan, and Chun-te Wu, "Extracting Grain Boundary and Surface Energy from Measurement of Triple Junction Geometry," (Invited paper) Interface Science, 7 (1999) 321-337.
1999.24: D. Kinderlehrer and D. Mason, "Incoherence at Heterogeneous Interfaces," J. Mech. Phys. Solids, 47 (1999) 1609-1632.
1999.25: T.A. Mason and B.L. Adams, "Use of Microstructural Statistics in Predicting Polycrystalline Material Properties" Metall. Mater. Transactions 30A(1999) p. 969-979.
1999.26: B. L. Adams, B. El-Dasher, S. Sun and W. Yang "An Experimental Study of Plasticity-Induced Intergranular Heterogeneity in Polycrystals," Proc. Plasticity 99, ed. A. S. Khan, Neat Press (1999) 783-786.
1998
1998.01: B.L. Adams, D. Kinderlehrer, W.W. Mullins, A.D. Rollett, and S. Ta’asan, "Extracting the Relative Grain Boundary Free Energy and Mobility Functions from the Geometry of Microstructures," Scripta Materialia, 38 (1998) 531-536.
1998.02: A. Talukder and D. Casasent, "Multiscale Gabor Wavelet Fusion for Edge Detection in Microscopy Images," (Invited paper) Proc. SPIE, 3391 (1998) 336-347.
1998.03: H. Garmestani, S. Lin, and B.L. Adams, "Statistical Continuum Theory for Inelastic Behavior of a Two-Phase Medium," Int. J. Plasticity, 14 (1998) 719-731.
1998.04: S.S. Sun and B.L. Adams, "A Mesoscale Study of the Interaction Between Grain Boundaries and the Deformation Field," Proc. Int. Conf. Texture and Properties of Materials, Clausthal, Materials Science Forum, 273-275 (1998) 229-236.
1998.05: S. Sun, B.L. Adams, C. Shet, S. Saigal, and W. King, "Mesoscale Investigation of the Deformation Field of an Aluminum Bicrystal," Scripta Materialia, 39 (1998) 501-508.
1998.06: W.W. Mullins, "Grain Growth of Uniform Boundaries with Scaling," Acta Materialia, 46 (1998) 6219-6226.
1998.07: B.L. Adams, D. Juul-Jensen, H.F. Poulsen, and R. Suter, "Future Trends: Texture Analysis for Structure-Sensitive Properties," Proc. Int. Conf. Texture and Properties of Materials, Clausthal, Materials Science Forum, 273-275 (1998) 29-40.
1998.08: B.L. Adams and T. Olson, "The Mesostructure-Properties Linkage in Polycrystals," Progress in Materials Science, 43 (1998) 1-87.
1998.09: P.H. Bocher, J. Azar, B.L. Adams, and J.J. Jonas, "Using OIM to Interpret the Dynamically Recrystallized Texture of a Low Stacking Fault Energy FCC Material," Proc. Int. Conf. Texture and Properties of Materials, Clausthal, Materials Science Forum, 273-275 (1998) 249-254.
1998.10: D. Casasent, L. Chen, and A. Talukder "Detection of Bands in Backscatter Microscopy Images Using New Hough Transform Techniques," Proc. SPIE, 3389 (1998) 72-84.
1998.11: P.S. Lee, H.R. Piehler, B.L. Adams, G. Jarvis, H. Hampel, and A.D. Rollett, "Influence of Surface Texture on Orange Peel in Aluminum," J. Materials Processing Technology, 80-81 (1998) 315-319.
1998.12: J.B. Lowekamp, G.S. Rohrer, P.A. Morris Hotsenpiller, J.D. Bolt, and W.E. Farneth, "The Anisotropic Photochemical Reactivity of Bulk TiO2 Crystals," J. Phys. Chem. B, 102 (1998) 7323-27.
1998.13:Grain Growth in Polycrystalline Materials III, TMS (1998) 3-12.
1998.14: D.M. Saylor, D.E. Mason, and G.S. Rohrer, "The Influence of Surface and Grain Boundary Tangent Plane Anisotropy on Thermal Groove Geometry in Magnesia", Grain Growth in Polycrystalline Materials III, edited by H. Weiland, B.L. Adams, and A.D. Rollett (TMS, Warrendale PA, 1998) 359-64.
1998.15: M. Takashima, P. Wynblatt, and B.L. Adams, "Wetting of Fe-Mn Alloy Grain Boundaries by Liquid Cu," Grain Growth in Polycrystalline Materials III, TMS (1998) 365-370.
1998.16: A. Talukder, D. Casasent, and S. Ozdemir, "Image Processing for Grain Boundary fetection in Microscope Images," Grain Growth in Polycrystalline Materials III, TMS (1998) 243-248.
1998.17: D. Kinderlehrer, C. Liu, F. Manolachem, and S. Ta’asan, "Remarks about Analysis and Simulations of Grain Boundary Systems," Grain Growth in Polycrystalline Materials III, TMS (1998) 437-442.
1998.18: D. Kinderlehrer and D.E. Mason, "Remarks about Incoherence at Heterophase Interfaces," Grain Growth in Polycrystalline Materials III, TMS (1998) 51-56.
1998.19: A.D. Rollett, C.-C. Yang, and W.W. Mullins, "Measurement of Triple Junction Geometry for Extraction of Grain Boundary Energies," Grain Growth in Polycrystalline Materials III, TMS (1998) 349-358.
1998.20: D. Raabe, "A 3D probabilistic Cellular Automaton for the Discrete Mesoscale Simulation of Recrystallization and Grain Growth Phenomena," Grain Growth in Polycrystalline Materials III, TMS (1998) 179-185.
1998.21: A. Morawiec, "Symmetries of Grain Boundary Distributions," Grain Growth in Polycrystalline Materials III, TMS (1998) 509-514.
1998.22: D. Kinderlehrer, "Microstructural evolution and metastability in active materials," Mat. Res. Soc. Symp. Proc., 529 (1998) 3-8.
1998.23: B. L. Adams, S. Sun and W. Yang "Experimental Approach to Continuum Dislocation Fields in Polycrystalline Materials," in proc. Ninth Int. Conf. Continuum Models of Discrete Systems, Istanbul, eds. E. Inan and K. Z. Markov, World Scientific, Singapore (1998) p. 428-436.
1997
1997.01: B.L. Adams, D. Kinderlehrer, S. Ta’asan, W.W. Mullins, and S. Costiner, "Extracting the Grain -Boundary Character/Free-Energy Relationship From the Microstructure: Pure <100> and <111> Tilt Boundaries," Mat. Res. Soc. Symp. Proc., 472 (1997) 105-111.
1997.02: A. Talukder and D. Casasent, "Real-Time Robust Line Detection in Microscopy Images," Proc. SPIE, 3208 (1997) 495-503.
1997.03: A.D. Rollett and W.W. Mullins, "On the Growth of Abnormal Grains," Scripta Materialia, 36 (1997) 975-980.
1997.04: A.D. Rollett, "Overview of Modeling and Simulation of Recrystallization," Progress in Materials Science, 42 (1997) 79-99.
1997.05: S. Sun, B.L. Adams, C. Shet, S. Saigal, and W. King, "A Mesoscale Experimental Study of the Interaction of Grain Boundaries with the Deformation Field," Proc. Plasticity ‘97 (ed. A. Khan) Neat Press, MD (1997) 89-90.
1997.06: B.L. Adams, "Orientation Imaging Microscopy: Emerging and Future Applications," Ultramicroscopy, 67 (1997) 11-17.
1997.07: D. Kinderlehrer, "Metastability and hysteresis in active materials, Smart Structures and Materials," Proc. SPIE, 3039 (1997) 2-13.
1996
1996.01: B.L. Adams and C-T. Wu, "Mapping the Grain Boundary Character/Free Energy Relationship in Polycrystalline Materials: Pure <100> and <111> Tilt Boundaries," Proceedings of ICOTOM-11, Xian, China (1996), 23-30.
Preprints
pre.02: K. Barmak, J. Kim, C.-S. Kim, W.E. Archibald, G.S. Rohrer, A.D. Rollett, D. Kinderlehrer, S. Ta¹asan, H. Zhang, D.J. Srolovitz, "Grain boundary energy and grain growth in Al films: Comparison of experiments and simulations," Scripta Materialia, (2005), submitted.
pre.03: E.R. Homer, B.L. Adams, and D. Fullwood, "Recovery of the Grain Boundary Character Distribution through Oblique Double-Sectioning," Scripta Materialia, (2005), submitted.
pre.04: C.-S. Kim, A.D. Rollett, and G.S. Rohrer, "Grain Boundary Planes: New dimensions in the Grain Boundary Character Distribution," Scripta Materialia, (2005), submitted.
pre.06: Y. Pang and P. Wynblatt, "Effects of Nb-doping and segregation on the grain boundary plane distribution in TiO2," J. Am. Cer. Soc., (2005) submitted.
pre.07: P. Wynblatt, Z. Shi, Y. Pang and D. Chatain, "On the relation between the anisotropies of grain boundary segregation and grain boundary energy," Interface Science, (2005) submitted.
pre.08: C.-S. Kim, T.R. Massa, G.S. Rohrer, "Modeling the Relationship between Microstructural Features and the Strength of WC-Co Composites," International Journal of Refractory Metals and Hard Materials, (2005) in press.
pre.09: M. Winning, A.D. Rollett, "Transition between low and high angle grain boundaries," Acta Mater., (2004) submitted.
pre.10: M. Upmanyu, P.A. Martin and A.D. Rollett, "Nanocrystalline Grain Growth due to Non-Linear Interface Kinetics," Phys. Rev. Lett., (2004), in press.
pre.11: K. Barmak, D. Kinderlehrer, I. Livshits, and S. Ta¹asan, "Remarks on a multiscale approach to grain growth in polycrystals," Conference in Trieste, (2005), submitted.
pre.12: G.S. Rohrer, Microstructures, Encyclopedia of Condensed Matter Physics, (2005) in press.
pre.13: V. Randle, Y. Hu, G.S. Rohrer, C.-S. Kim, "The Distribution of Misorientations and Grain Boundary Planes in Grain Boundary Engineered Brass," Materials Science and Technology, (2005) submitted.
pre.14: B. L. Adams, B. S. El-Dasher, R. Merrill, and J. Basinger, "Extending Taylor Plasticity for Microscopic Slip Transfer Conditions", in Proc. Int. Union Theoretical & Applied Mechanics, ed. S. Ahzi, Marrakesh, Oct. 20-25, 2002, in press.
pre.15: D. Kinderlehrer, I. Livshits, and S. Ta'asan, "A variational approach to modeling and simulation of grain growth," SIAM Journal on Sci. Comp., submitted.
pre.16: N.K. Roy, R.M. Suter, Tilton, T. Przybycien, J. Schneider, D. Sholl, "Study of the conformational polymorphic transition in L-glutamic acid crystals," J. Cryst. Growth, (2004) submitted.
pre.17: B. L. Hansen, B. L. Adams, M. E. Lyon and A. J. Henrie. "On the Reconstruction of Polycrystalline Microstructures from Two-Point Correlation Statistics", J. Computer -Aided Materials Design, (2004) in press.
pre.18: A. J. Henrie, B. L. Adams, "Percolation Paths of Three Dimensions in Sensitized Stainless Steel", Metallurgical and Materials Transactions, (2004) submitted.
pre.19: J. Basinger, E. Homer, B. L. Adams and K. Golden, "Two-Dimensional Grain Boundary Percolation in Alloy 304 Stainless Steel", Scripta Materialia, (2004) submitted.
pre.20: R.M. Suter, D. Hennessy, C. Xiao, U. Lienert, "Single crystal tests of three dimensional x-ray diffraction microscopy," in preparation.
pre.21: T. A. Bennett, R.A. Jaramillo, D.E. Laughlin, J.B. Wilgen, R. Kisner, G. Mackiewicz-Ludtka, G.M. Ludtka, P.N. Kalu, A.D. Rollett, "Texture Evolution In Fe-1%Si As A Function of High Magnetic Field," Proc. ITAP-2, Metz, France, July 2004, (2004) in press.
pre.22: D.R. Waryoba, P.N. Kalu, and A.D. Rollett, "The Role of Orientation Pinning in Statically Recrystallized Oxygen-Free High-Conductivity Copper Wire," Metallurgical & Materials Transactions, (2004) in press.
pre.23: A.J. Francis and P.A. Salvador, "Epitaxial growth of Cu(100) and Pt(100) thin films on perovskite substrates", Thin Solid Films, (2004) submitted.
pre.24: A. Koritnik, A.J. Gellman "Naturally Chrial Metal Surfaces" Progress in Surfaces Science, in preparation.
pre.25: K. Okuda and A.D. Rollett, "Monte Carlo Simulation of elongated recrystallized grains in steels," Computational Materials Science, (2005) submitted.
return